Home   ::   Adiabatic Humid...   ::   humiDisk

humiDisk

Technical specifications
Power supply 230 Vac, 50 Hz, 0,22 kW (0,29 kW con frost heater)
Operating conditions 1T35°C, 0...100% RH non-condensing (w/o frost heater) - -2T35°C, 0...100% RH non-condensing (w/ frost heater)
Storage conditions -10T60 °C, 0...90% RH non-condensing
Humidification capacity (kg/h) 1,5; 5,5
Installation wall
Supply water conductivity mains or demineralised water
Index of protection IP14
humiDisk is a small, sturdy and easy to install humidifier. It operates on mains or demineralised water and is based on a simple and effective principle. By exploiting the centrifugal force produced by a spinning disk, humiDisk atomises the water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling at the same time. The energy consumption is just 34 W/(kg/h).
humiDisk is easy to install and requires minimum maintenance. CAREL supplies electrical panels fitted with electronic humidity controller or simple low cost mechanical humidistats, allowing one or more humiDisk units to be operated in parallel and maintain the humidity level at the set value.
The automatic draining of the water tank after each operating cycle guarantees hygiene and makes the appliance ideal for applications in produce stores, cold rooms and other small industrial environments. Using the CAREL electrical panels, an additional washing cycle is also performed whenever the humidifier starts.
The humidifier can be fitted with optional heaters that are activated automatically at temperatures around 0°C, allowing operation down to -2°C.
humiDisk is supplied with assembly brackets for easy wall mounting, or can be hung from the ceiling using metal chains.

Applications for this product

CAREL INDUSTRIES S.p.A. - fully controlled by CAREL S.p.A. - all rights reserved P.I.04359090281